Floor Polish, Hardwood

24 fl. oz.

for Personal Shopping

Product Details

Swedish formula. New easy to apply polish. High gloss. Non-toxic, quick & easy. Durable urethane shine. Specially designed for wood floors. Recommended by professionals since 1919. Since 1919, Bona has made the finest wood floor finishes available worldwide. Bona's unique Swedish finish technology has now been applied to this specially formulated waterborne urethane polish. What it Does: Polish adds a protective new layer and fills in microscratches, evening out the appearance of your floor. Bona's Greenguard certified, non-toxic products ensure you have the best for your floors, your family and the environment.


Bona Hardwood Floor Polish cannot be coated with polyurethane or Bona Hardwood Floor Refresher. Bona Hardwood Floor Polish is not a cleaner. Make sure the floor is completely clean and dry before applying this product. Do not use over any floor that has been oiled or waxed. Wax and oil may prevent this product from adhering. Always use a clean applicator. Use of contaminated applicator may cause a hazy a streaky appearance. Never use string mops, cotton mops or sponge mops to apply this product. Avoid replacement of furniture and floor mats for at least 24 hours. Not for use on unfinished wood or unsealed floors. Keep from freezing. Keep out of reach of children. May cause stomach irritation. If swallowed, drink 1 or 2 glasses of water to dilute. In case of eye contact, flush with water. Note: Buyer assumes all responsibility for proper use in accordance with label instructions. Results may vary according to the individual application techniques and prior condition of floor.


Tools Needed: mop, cleaning pad, applicator pad, hardwood floor cleaner. 1. Remove furniture, rugs, etc. Vacuum, sweep or dust mop, then thoroughly clean with Bona Hardwood Floor Cleaner and the blue microfiber cleaning pad on your Bona mop. Allow the floor to dry. 2. Gently rock product back and forth to mix. Slightly dampen the applicator pad with water and attach to mop. Squirt product onto the floor and spread. Work in sections small enough to keep the applicator pad wet. Smooth with the grain. Continue working in sections until the entire floor is finished. Rinse applicator pad with water. 3. Allow to dry at least 1 hour before walking on the floor. For a glossier to a second coat may be applied after 2 hours. Allow 24 hours before heavy traffic. For Best Results: Always test in an inconspicuous section of the floor before use. Coverage should be 500 square feel per bottle. Do not apply the product too thin or streaking will occur. Coat the entire floor to ensure an even appearance. 1. Clean. 2. Squirt and spread. 3. Allow to dry.

List Quick View
List Quick View


Not Available at
Items listed as Not Available may not be sold in your store or may not be available at this time.
Est. List Total at
Your estimated total will vary depending on weight/number of items, tax, discounts, etc. Your actual total can only be determined upon purchase at checkout.
Not Available