Command

Medium Hooks Clear

2 ea.

for Personal Shopping

Image
Directions

To apply. 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Blue side. Remove blue liner. Press adhesive to hook. Make sure tab is accessible for future removal. 3. Black side. Remove black liner. 4. 30 Seconds. Press hook firmly for 30 seconds. Wait 1 hour before use. To remove: 1. Never pull strip towards you. 2. Straight down. Hold hook gently to prevent hook from snapping fingers. Do not press hook against wall. 3. 12" 30cm. Stretch straight down along wall at least 12 inches (30 cm) until strip releases from wall. Important: failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C).

List Quick View
List Quick View

|

Not Available at
Items listed as Not Available may not be sold in your store or may not be available at this time.
Est. List Total at
Your estimated total will vary depending on weight/number of items, tax, discounts, etc. Your actual total can only be determined upon purchase at checkout.
VIEW FULL LIST
Not Available
Note